Extrusion Grade Thermoplastic Elastomers (TPEs)

Call for Enquiry

Product Series

PHOENIX™ TPE 04 Series (Shore 30A ~ 80A)
SEBS based. High resilience grade with lowest melt flow index (MFI). For extrusion and blow molding. RoHS compliant. Conform to FDA, ISO 10993-5 & ISO 10993-10. Suitable for medical tube, extrusion profile, blown film, sheet

PHOENIX™ TPE 06 Series (Shore 15A ~ 95A)
SEBS based only. Superior weatherability. For outdoor use. FDA approved.

PHOENIX™ TPE 07 Series (Shore 15A ~ 95A)
SEBS based. Common grade for window profile and tube

PHOENIX™ TPE 16 Series (Shore 45A ~ 95A)
TPV+SEBS based. Higher heat resistance and good surface finish.
Suitable for window seal, extrusion profile, wire and cable sheath

Features

  • Smooth and silky surface
  • Non-sticky
  • Excellent tensile strength
  • Excellent resilience
  • Stable melt flow

Applications: tube, profiles, sheets, film, band, wire and cable sheath, etc.

Safety/Quality Approvals: FDA CFR 21 177.2600, RoHS, EN71, REACH SVHC, PAHS & phthalate, Formaldehyde, Dimethyl Fumarate, Nonylphenol, ISO 10993

Description

Abbreviation: TPEs

Details: A procedure called extrusion is used to make things with a defined cross-sectional profile. The desired cross-section of a die is pushed through a material. The capacity to produce extremely complicated cross-sections and the ability to deal with fragile materials because the material only experiences compressive and shear stresses are the two key advantages of this technology over other production procedures. Additionally, it creates components with superb surface finishes.
Extrusion Grade PHOENIX™ Thermoplastic Elastomers (TPEs) have been developed by HR Solution and are appropriate for extrusion profiles, tubes, films, and sheets. For continuous extrusion, the material has a low MFI and relatively constant quality. The MFI of TPEs should typically be less than 3g/10min. Co-extruding Extrusion Grade Thermoplastic Elastomers (TPEs) with PP and PE results in a fantastic blend of hard and soft material. Thermoplastic Elastomers (TPEs) of the PHOENIX™ Extrusion Grade can also combine soft and hard TPEs.

Related Products

Prev
Next